Knox Krypton 13000, 11KW, Single Phase, IP 21, Dual Output, MPPT, Net Metering, Pure Sinewave Inverter

Description

Model	HYBRID INFINI MAX II-11KW-48V
Phase	1-phase in / 1-phase out
Maximum PV Input Power	13000W (6500W x 2)
Rated Output Power	11000W

GRID-TIE OPERATION
PV INPUT (DC)
Nominal DC Voltage / Maximum DC Voltage	500VDC
Start-up Voltage / Initial Feeding Voltage	120VDC / 150 VDC
MPP Voltage Range	90 ~ 450 VDC
Number of MPP Trackers / Maximum Input Current	27A x 2 (MAX 40A)
Nominal Output Voltage	220/230/240 VAC
Output Voltage Range	170-280 VAC (For Personal Computers) 90- 280 VAC (For Home Appliances
Nominal Output Current	48 A
Power Factor	> 0.99
EFFICIENCY
Maximum Conversion Efficiency (DC/AC)	95%
OFF-GRID OPERATION

AC Start-up Voltage / Auto Restart Voltage	120 – 140 VAC / 180 VAC
Acceptable Input Voltage Range	90 – 280 VAC or 170 – 280 VAC
Frequency Range	50 Hz/60 Hz (Auto sensing)
BATTERY MODE OUTPUT (AC)

Nominal Output Voltage	220/230/240 VAC
Output Waveform	Pure sine wave
Efficiency (DC to AC)	93%
DC Voltage	12 VDC ± 5%, 100W
Transfer Time	10 ms (For Personal Computers) ; 20 ms (For Home Appliances)
BATTERY & CHARGER
Nominal DC Voltage	48 VDC
Floating Charge Voltage	54 VDC
Overcharge Protection	63 VDC
Solar Charger type	MPPT
Maximum Solar Charging Current	150A
Maximum AC Charging Current	150A
Maximum Charging Current	150A
Surge Power	22000VA
GENERAL
PHYSICAL
Dimension, D x W x H (mm)	158.4 x 503.6 x 530.8
Net Weight (kgs)	20
INTERACE
Parallel Function	Yes, 6 units
Communication Port	USB/RS232/RS485/Wifi/Dry-contact
ENVIRONMENT
Humidity	0 ~ 90% RH (No condensing)
Operating Temperature	-10°C to 50°C
Storage Temperature	-15°C to 60°C

Dual outputs, for smart load management Maximum PV input current increases to 27A
Wide PV input voltage range 90VDC ~ 450VDC
Status indication with RGB lights
Built-in Wi-Fi for mobile monitoring (Android/iOS App is available)
Supports USB On-the-Go function
Battery independent design
Configurable AC/PV output usagetimer and prioritization
Reserved communication port for BMS (RS485, CAN-BUS or RS232)
Replaceable fan design for ease of maintenance.
Compatible to Utility Mains or generator input
Built-in anti-dust kit
Built-in DC output for DC fan,LED bulb, router and so on.
Parallel operation with 6 units

There are no reviews yet.

Be the first to review “Knox Krypton 13000, 11KW, Single Phase, IP 21, Dual Output, MPPT, Net Metering, Pure Sinewave Inverter”