Inverex Nitrox 6.6KW Hybrid Solar Inverter – 48V Single Phase 10,560W PV Input IP65 Rated 5 Year Warranty
₨ 260,000
Description
The Inverex Nitrox 6.6KW Single Phase is a high performance hybrid solar inverter featuring advanced MPPT technology and smart energy management. It supports both lithium-ion and Deep Cycle Tubular & lead-acid batteries and can handle a maximum PV Input power of 10560 W. With an IP65 protection rating, it is designed to work for both on-grid & off-grid solar applications. This hybrid inverter comes with a 5 year comprehensive warranty, which is suitable for choice for residential or commercial systems.
Key Features
10.5KW PV Input: Wide 150–425VDC MPPT for max energy capture
Dual MPPTs: Independent strings (2/1+1) for efficient tracking
140A Charge/Discharge: Fast cycles, perfect for large systems
Parallel Ready: Stack up to 16 units, both on-grid & off-grid
Touch LCD + IP65: Vibrant screen in weatherproof casing
AC Coupling: Retrofit-friendly for system upgrades
Time-Based Battery Mode: 6 customizable time slots for charging/discharging
Generator Support: Stores DG energy for hybrid setups
Silent Operation: Under 30 dB noise, suitable for indoor use
Air Cooling: Smart thermal control from -40°C to +60°C
Advanced Protections: Over current, islanding, surge, fault detection
High Efficiency: 97.6% peak efficiency with <0.5% DC ripple
Smart Communication: RS485/RS232/CAN + optional WiFi/4G
5-Year Warranty: Backed by trusted Inverex support
Inverex Nitrox 6.6KW Single Phase Hybrid Inverter Datasheet
Technical Specification of Inverex Nitrox 6.6KW Hybrid Solar Inverter
| Model | Inverex Nitrox Series 6600 Watts – 48V |
|---|---|
| Battery Type | Lead Acid – Tubular – Lithium-ion |
| Battery Voltage Range (V) | 40 ~ 60 |
| Max. Charging Current (A) | 140 |
| Max. Discharging Current (A) | 140 |
| Charging Strategy for Li-ion Battery | Self-adoption to BMS |
| Number of Battery Inputs | 1 |
| Max. PV Input Power (W) | 10560 |
| Max. PV Input Voltage (V) | 500 |
| Start-up Voltage (V) | 125 |
| MPPT Voltage Range (V) | 125-425 |
| Rated PV Input Voltage (V) | 370 |
| Max. Operating PV Input Current (A) | 18+18 |
| Max. Input Short-Circuit Current (A) | 27+27 |
| Rated AC Input/output Active Power (W) | 6600 |
| Max. AC Input/output Apparent Power (VA) | 7260 |
| Rated AC Input/output Current (A) | 30/28.7 |
| Max. AC Input/output Current (A) | 33/31.6 |
| Max. Continuous AC Passthrough (grid to load) (A) | 40 |
| Peak Power (off-grid) (W) | 2 times of rated power, 10s |
| Power Factor Adjustment Range | 0.8 leading to 0.8 lagging |
| Rated Input/output Voltage/Range (V) | 220/230 (0.85Un-1.1Un) |
| Rated Input/output Grid Frequency/Range (Hz) | 50/45-55, 60/55-65 |
| Grid Connection form | L+N+PE |
| Total Current Harmonic Distortion (THDi) | <3% (of nominal power) |
| Max. Efficiency | 97.6% |
| Euro Efficiency | 96.5% |
| MPPT Efficiency | 99% |
| Integrated | DC Polarity Reverse Connection, AC Output Overcurrent Protection, Thermal Protection, AC Output over voltage protection, AC output short circuit protection, DC component monitoring, Over voltage load drop protection, Ground fault current monitoring, Arc fault circuit interpreter (Optional), Power Network monitoring, Island protection Monitoring, Earth fault detection, DC input switch, DC terminal insulation impedance monitoring Residual current RCD detection, surge protection level. |
| Surge Protection Level | TYPE II (DC), TYPE II (AC) |
| Communication Interface | RS485/RS232/CAN |
| Monitor Mode | GPRS/WIFI/Bluetooth/4G/LAN (optional) |
| Operating Temperature Range (°C) | 40 to +60, >45°C Derating |
| Permissible Ambient Humidity | 0-100% |
| Permissible Altitude | 2000m |
| Noise (dB) | <30 |
| Ingress Protection (IP) Rating | IP 65 |
| DC Injection Current | <0.5% In |
| Grid Regulation | IEC 61727, IEC 62116, CEI 0-21, EN 50549, etc. |
| Operating Temperature (°C) | -40 to +60, >45°C derating |
| Inverter Topology | Non-Isolated |
| Over Voltage Category | OVC II (DC), OVC III (AC) |
| Cabinet Size (W x H x D mm) | 340×470×258 (Excluding Connectors and Brackets) |
| Weight (kg) | 17.65 KG |
| Cooling Type | Intelligent Air Cooling |
| Warranty | 5 Years Warranty (The warranty period depends on the final installation site of the inverter. For more information, please refer to the warranty policy.) |
| Grid Regulation | IEC 61727, IEC 62116, CIE 0-21, EN 50549, NRS 097, RD140, UNE 217002, OVE Richtlinie R25, g99, VDE -AR-N-4105 |
| Safety EMC standards | IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-2 |
The Inverex Nitrox 6.6 kW single-phase IP65 hybrid solar inverter price in Pakistan is Rs. 260000/ as of June 23, 2026.
You may also like:
Inverex Nitrox 8KW- 48V Hybrid Solar inverter, (Three phase) PV 12800W, IP65, 5 Year Warranty

























